In most metalworking and construction shops, laser cutting begins with a subcontractor. You send a DXF file, receive a quote, and pick up the parts a few days later. For single orders, this makes sense. The question of owning a laser cutter arises when laser cutting invoices arrive weekly and installation depends on someone else's turn.
This text explains the price of a service (rate per meter, cuts, service, minimum), the list price of a dedicated work station, and how to calculate the threshold in meters of cut per year. We've already described the threshold mechanism using laser welding and laser engraving as examples. Here, we apply it to sheet metal, where the service is billed per linear meter.
The hard numbers are rates from published price lists and retail list prices, as of October 2026. The meters, penetrations, variable costs, speed, and depreciation period in the examples are sample assumptions that can be replaced with your own data. We describe the technology (gases, edge, thicknesses by material) separately in the text on sheet metal laser cutting .
How companies price laser cutting
Published price lists for laser cutting services usually have four components, and the rate per linear meter (m) for small details is often not the highest.
The rate per meter depends on material and thickness. Cut It Fast from Katowice (net price list, as of October 2026) lists black steel at PLN 2.80/m for 1.5 mm, PLN 5.00/m for 3 mm, and PLN 7.80/m for 5 mm. 1.4301 stainless steel costs PLN 13.50/m for 3 mm and PLN 16.50/m for 4 mm, while 4 mm thick 5754 aluminum costs PLN 11.00/m. Stainless steel of the same thickness is therefore nearly three times more expensive than black steel.
Piercing and handling. The same price list adds PLN 1.20 for each piercing (each hole and each separate contour), PLN 25 for handling per item, and PLN 3 per item. Blaszki.net/FastCNC charges PLN 1.00 for each hole.
Minimum order. Cut It Fast: PLN 150 net. ciecielaser.pl: PLN 300 net for sheet metal and PLN 500 net for pipes and profiles. ARAMIS: PLN 500 excluding metal and delivery costs, although the FAQ on the same site states that no minimum is required. Blaszki.net/FastCNC: PLN 25.
Design and materials. ciecielaser.pl prices the design service at PLN 200 net per designer's hour. Sheet metal is usually priced separately: at Cut It Fast, 3mm steel costs PLN 211/m², and 3mm stainless steel costs PLN 451/m².
Rates vary widely. ARAMIS declares between PLN 1.35 and PLN 30 per meter (excluding VAT), while Blaszki.net/FastCNC, in a November 2025 entry, starts at PLN 0.30/meter for 1 mm S235, with material billed separately. The kb.pl aggregator provides approximate labor-only prices: 3 mm black steel PLN 5.72–6.70/meter in Lower Silesia, 3 mm stainless steel PLN 11.70–13.70/meter, both in Lower Silesia (as of October 2026).
How much does a retailer cost: raises and minimums change the rate
The rate per meter is the cutting price, not the cost of the detail. For example, let's assume a 3 mm black steel detail: an outer contour and four holes, for a total of 1.6 m of cutting and five piercings. According to the Cut It Fast price list (net, as of October 2026), the result is as follows:
| Ingredient (detail taken for example) | Series of 50 pieces | 1 pc. |
|---|---|---|
| Cutting: 1.6 m × 5.00 PLN | 8.00 PLN/pcs. | 8.00 PLN |
| Raises: 5 × 1.20 PLN | 6.00 PLN/pcs. | 6.00 PLN |
| Service: PLN 3/piece and PLN 25/item | 3.50 PLN/pcs. | estimated PLN 28.00 |
| Total for cutting | estimated PLN 17.50/piece, series estimated PLN 875 | 42.00 PLN, but minimum 150 PLN |
| Effective rate per meter | estimated PLN 10.94/meter | estimated PLN 93.75/meter |
In a series, the effective rate is more than twice the list price, and in the case of a single item, the minimum order is decisive.
However, don't use the full effective rate when comparing with your own machine. Item and piece fees represent the cost of programming, removing, sorting, and packaging parts, and these activities are also carried over to your own cutting machine; omitting the WC would result in an artificially low threshold. It's more fair to compare the rate per meter plus the piercings, here estimated at PLN 8.75/meter (PLN 5.00 + PLN 6.00 / 1.6 meters), with your own cost per meter and piercings.
Cost of your own stand: machine, equipment, gas and connection
A fiber laser cutter (the beam is created in an optical fiber) for 1500 × 3000 mm sheets has public prices from several suppliers. The RBFIB 1530 fiber laser plotter costs from PLN 105,610.00 net (indicative price, configured for the process), with an S&A CWFL-1500 chiller and two automatic gas valves included. List prices for other 1500 W cutters in this format start at PLN 77,235.77 net from one domestic distributor, while in another domestic store, a 1.5 kW cutter costs PLN 150,000.00 net (as of October 2026). A full list by power and equipment can be found in the guide on how to select the power of a laser cutter for metal .
You need to add what's not included in the price. If the chiller isn't included, the CWFL-1500 costs PLN 9,500.00 net at the latter store. For compressed air cutting, you need a high-pressure compressor with a dryer, such as the THEOR H1520 for PLN 23,252.03 net (same store, as of October 2026). You should also plan for fume extraction with filtration; its price isn't listed because it depends on the facility and material, so take it from the supplier's quote.
Gas is usually purchased in cylinders; for example, nitrogen 5.0 in a 50-liter cylinder costs PLN 165.00 net (contract price, not retail) under the Wrocław City Hall tender agreement. The text discusses which gas is appropriate for which material and how much it costs per hour of cutting, and how much nitrogen or oxygen is used for laser cutting .
That leaves energy, space, and people. The RBFIB 1530 requires a 380 V (3-phase) power supply, takes up 450 x 220 x 200 cm, and weighs 1700 kg, so you need to factor in the utility connection, flooring, and access with sheets. It's best to measure energy with a test run, as the machine data sheets don't provide consumption per square meter.
According to CIOP-PIB, a cutting laser is a Class 4 device (PN-EN 60825-1:2014-11), while a completely enclosed device can be Class 1. A risk assessment of the workplace is performed in both cases, and in the case of an open machine, a separate zone and eye protection are also required; details are described in the text on fiber optic lasers in plant practice .
Threshold formula in meters of cut per year
The break-even point is the number of meters of cutting per year above which your own cutting machine costs less than outsourcing. Unlike the welding entry, we count meters, not hours, because the service is billed in meters.
| Symbol | Meaning | Where to get it? |
|---|---|---|
| AND | machine, compressor, connection, extraction, transport, start-up | list prices, valuation |
| n | years of depreciation or leasing period | company policy |
| S | Fixed annual costs: service, insurance, space, operator's position only for the laser | bookkeeping |
| c | variable cost of the subway: gas, energy, nozzles and glasses, punctures, operator time | sample measurement |
| at | service rate per meter plus puncture charges converted per meter | price lists, invoices |
| M | meters of cutting per year | invoices, DXF files |
M* = (I / n + S) / (u − c)
Above M*, it's cheaper to cut in-house; below M*, it's cheaper to outsource. If u is less than or equal to c, the machine will never pay for itself. When purchasing through leasing and financing, replace I / n with the annual installment total.
The variable cost c depends on the speed, which in turn depends on the material, thickness and gas, so the most honest way to measure it is to do a trial run: ask the supplier to cut your typical sheet, note the time and gas consumption, and divide the hourly cost by the meters cut.
Calculation example: threshold for RBFIB 1530
Let's assume I = PLN 138,862: RBFIB 1530 from PLN 105,610.00 net, THEOR H1520 compressor for PLN 23,252.03 net and PLN 10,000 for the connection and site (price the exhaust system separately). Let's also assume n = 5 years and S = PLN 12,000 per year, excluding the operator's full-time job.
On the service side, we take the rate per meter with piercings from the detail example: u = PLN 8.75/meter. On the machine side, let's assume c = PLN 3.50/meter, meaning PLN 3.00 for the cutting itself and PLN 0.50 for piercings (estimated PLN 0.16 per piercing: gas, nozzles, time).
The fixed cost is estimated at PLN 39,772 per year (138,862 / 5 + 12,000). The difference u − c is estimated at PLN 5.25/m. Estimated threshold: M* = 39,772 / 5.25, i.e. approximately 7,600 m of cutting per year, and with 50 weeks of work, approximately 150 m per week.
| Scenario | M [m/year] | Outsourcing [thousand PLN/year] | Own cutting machine [thousand PLN/year] | Application |
|---|---|---|---|---|
| Few orders | 1,000 | approx. 9 | approx. 43 | commission |
| Moderately | 3,000 | approx. 26 | about 50 | commission |
| On average | estimated 7,500 | ca. 66 | ca. 66 | threshold |
| A lot | 12,000 | approx. 105 | ca. 82 | own |
The outsourcing is M × u, the own cutting machine is a fixed cost plus M × c.
It's worth converting this into hours. For example, let's assume a speed of 3 m/min: the threshold is then approximately 42 hours of beam operation per year, less than an hour per week, not including piercing, loading, and programming. At 12,000 m, the savings are estimated at PLN 23,000 per year, and the beam operates for approximately 67 hours. The machine is mostly idle, and the small profit easily eats into the error in the c estimate.
Changing the assumptions quickly shifts the result. If you're cutting primarily 5mm mild steel, which is in the middle of the range that vendors roughly declare for the 1500W class, the cost increases to an estimated PLN 11.55/m (PLN 7.80 plus penetration). With a higher variable cost, let's assume PLN 4.50/m, the threshold drops to approximately 5,600 m.
If you hire an operator solely for the laser, his cost (let's assume PLN 84,000 per year) goes to S, c drops to PLN 2.50/m, and the threshold increases to about 20,000 m. This is still only about 110 beam hours per year, so such an operator would spend most of his time doing something else.
Conclusion: When comparing the same activities, the threshold in meters seems low, but in hours it represents dozens of hours of machine operation per year. A purchase is only justified when the number of meters is many times greater, or when response time and confidentiality are key. The most important are two numbers, known only to you: the rate per meter, including the overruns from your invoices, and the cost per meter measured during a sample.
The hidden costs of outsourcing
- Transport and collection. Items travel in both directions, with someone packing, securing, and unloading them.
- There's a queue. The subcontractor has their own schedule, and your installation is waiting for details. This cost isn't included on the invoice.
- Small orders. A prototype, a correction, or a missing detail means a new item with service and a minimum order.
- Confidentiality. DXF files and information about what you produce go beyond the company.
- Quality responsibility. Who is responsible for burrs, discoloration, or out-of-tolerance dimensions? If the order doesn't specify this, the corrections are returned to you.
Your own machine also has costs beyond the price: operator training, scrap from the first few weeks, and downtime. Enter these in S and c. We described the starting positions in the text about how much it costs to start a CNC station .
When to still outsource laser cutting
Thick plates. Roboteus confirms the RBFIB 1530 thickness range for a specific material grade before quoting. For plates above this range, please contact a supplier with a stronger source.
Pipes and profiles. A rotary attachment is required, which significantly increases the machine's price. For a few pipes per year, it's cheaper to pay at least 500 PLN net at ciecielaser.pl (as of October 2026).
Occasional orders and large sheets. If the M is far below the threshold or the parts don't fit on a 1500 x 3000 mm sheet, the machine has no chance of surviving.
When your own cutting machine is cheaper
Consistent, clearly above-the-threshold production is a fundamental requirement. Having your own machine also wins out for many small items and prototypes, as the minimum order and item fees drive up the invoice the most. It's also a winner for tight deadlines, where response time is crucial, and when drawings shouldn't leave the company. You can check the configuration in the Roboteus fiber laser plotter catalog, and request a quote for your material.
Frequently asked questions
How much does a meter of laser cutting cost?
Published price lists for 3mm black steel cost, for example, PLN 5.00/meter net at Cut It Fast, while kb.pl gives an approximate price of PLN 5.72–6.70/meter for labor in Lower Silesia (as of October 2026). Stainless steel of the same thickness is significantly more expensive: PLN 13.50/meter at Cut It Fast. The price includes piercing, item handling, and minimum order requirements.
What determines the price of laser cutting?
This depends on the material and thickness, the number of pierces, the number of items and pieces, the minimum order, and whether the contractor prepares the file and delivers the material. For small details, piercing and service can cost as much as the cutting itself.
How much does laser cutting of a single detail cost?
For a single piece, the price is usually determined by the minimum order quantity, not the rate per meter: at Cut It Fast it's PLN 150 net, at ciecielaser.pl it's PLN 300 net for sheet metal (as of October 2026). In the example in the text, the item itself would cost PLN 42.00, but the invoice would be PLN 150.
From how many meters per year does your own laser cutter pay off?
This depends on the service rate per meter with punctures and your cost per meter. In the example with the sample assumptions, the threshold was approximately 7,600 meters per year, which, at the assumed speed, translates to approximately 42 hours of beam operation. With an operator hired solely for the laser, this increases to approximately 20,000 meters. Calculate the threshold on your invoices and check how many machine hours it represents.
Is it still worth outsourcing with your own cutting machine?
Yes, this is often the cheapest arrangement: your own machine handles thin sheet metal and regular runs, while the subcontractor handles thick sheet metal, pipes, and seasonal peaks. In this case, you calculate your threshold solely on the meters that remain in-house, excluding the sheet metal and pipes that are handed over to the subcontractor.
Sources
- https://cutitfast.pl/
- https://aramislaser.pl/service/siecie-laserowe/
- https://ciecielaser.pl/ile-kosztuje-ciecie-laserem/
- https://blaszki.net/blog/cennik-ciecia-laserowego-aktualne-ceny.html
- https://kb.pl/cenniki/ciecie-laserowe-stal-czarna/
- https://kb.pl/cenniki/laserowe-ciecie-blach/
- https://roboteus.com/pl/maszyny/plotery-laserowe-fiber/ploter-laserowy-fiber-rbfib-1530/
- https://roboteus.com/pl/maszyny/laser-plotery-fiber/
- https://www.umw.edu.pl/sites/default/files/2025-11/Cennik%20-%20gazy%20techniczne%20i%20medyczne%2C%20dzier%C5%BCawy%20butli_obowi%C4%85zuje%20do%202.11.2026.pdf
- https://www.ciop.pl/CIOPPortalWAR/file/99433/Ochrona_przed_promieniowaniem_laserowym_MatInf_M.Okrasa_I.PN.06.pdf
Editorial note
List prices and service rates are from retail and plant websites as of October 2026 and are subject to change. Gas prices are sample contract prices from tender agreements. The numbers in the calculation examples are assumptions to illustrate the formula, and the thickness range depends on the machine and material type. This text does not replace the manufacturer's instructions or occupational health and safety regulations for Class 4 laser equipment.

